Sony FD Trinitron WEGA KV-30HS510 Operating Instructions Manual page 89
Fd trinitron wega
Hide thumbs
Also See for FD Trinitron WEGA KV-30HS510:
- Operating instructions manual (94 pages) ,
- Supplementary manual (1 page) ,
- Service manual (191 pages)
Table of Contents
Advertisement
General
How to reset TV to
i_
Turn on the TV. While holding
down the EqE$ El button
on the remote
factory settings
control, press the POWR button on the TV. (The TV will turn itself off, then
back on again.) Release the RSE button.
How to restore Video settings i_
Press the R5 E button
on the remote control while in the Video Menu (see
to factory settings
page 66). .................
How to restore Audio
i_
Press the
button
on the remote control while in the Audio Menu (see
settings
t o
factory settings
page 68).
..........
Cannot cycle through
the
_
Be sure the Vde0 Labeloption
is not set to 5 p (see page 78).
other video equipment
connected
to the TV
Cannot operate
Menu
_
If a menu option appears
in gray, this indicates
that the TV is in a state in
.................................................................... wNch
fl_e menu op}!on !s n°! avai!able: ........................................................................
L_t password
B
In the password
screen (see page 74), enter the following
master password:
4357. The master password
clears your previous
password;
it cannot be
...........................................................
used to temp0rar!!y
unb!ock chalme!s: ..............................................................
TV makes "popping"
sound
i_
This is a normal sound that results from the TV automatically
degaussing
when turned
on
each time it is turned
on.
LED on front panel is lit
IB
The STAND BY LED (see page 11) blinks when the TV is turned
on, then
shuts off when the picture is displayed.
If the LED blinks continuously,
this
may indicate
the TV needs service.
B
The TIMER LED (see page 11) indicates
that the timer is set (page 79).
When the timer is set, this LED will remain lit even when the TV is turned
off.
Digital cable box does not
2_
Be sure that you have not connected
the digital cable box to the TV's TO
work
CONVERTER
jack. This jack is not compatible
with digital cable boxes.
2_
If you are connecting
a VCR and digital cable box using a splitter, as
described
on pages 24-25, you must use a special bi-directional
splitter that
is designed
to work with your digital cable box. Contact your cable
provider
for details.
Advertisement
Table of Contents
