Sony FD Trinitron WEGA KV-30HS510 Operating Instructions Manual page 20

To co_rr_ct the cable box a_d ca_[_
1 Connect the cable from your cable company to the TV's
VHF/UHF jack.
Use a coaxial cable to connect the TV's TO CONVERTER jack to
the cable box's input jack. (The TV's internal converter lets you
switch between unscrambled signals coming straight into the TV
and scrambled signals coming in through the cable box,
eliminating the need for an external splitten)
3 Use a coaxial cable to connect the cable box's output jack to the
TV's AUX jack.
4 Run the Auto Setup program, as described in "Setting Up the
Channel List" on page 38.
_N
Coax a[ cable
OUH
3
AUX
TO
Co_xian cabBe CONVERTER
I
Cable (urrls_alr_'hb_ed_halr_rrleh;) VHF/UHF
Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3 or 4)
and then use the cable box to switch channels.
Set up the TV remote control Program the remote control. See "Programming the Remote Control" on
to operate the cable box pages 43-44.
Activate the remote control to Press SA/CA[_ UNC110_
operate the cable box
Prevent the accidental When using the cable box, you need the TV to stay on the channel the cable
switching of TV channels box is set to (usually channel 3 or 4). You can use the TV's Channel Fix
feature to lock in a specific chaPa_el. For details, see "Using the Channel
Menu" on page 72.
Switch the TV's input Press A_ to switch back and forth between the TV's VHF/UHF
between the cable box and (ul_scrambled channels) and AUX (scrambled) inputs.
cable