Cable Box Only - Sony FD Trinitron WEGA KV-30HS510 Operating Instructions Manual

Cable Box Only
IFo_ bestires_ks vase _ his connec_io_ if:
_I Your cable company scrambles all channels, which requires you
to use a cable box.
_I You do not have a VCR. (If you have a VCR, see pages 22 and 24.)
_1 Use the TV remote control to change channels coming through
the cable box to the TV's VHF/UHF jack. (You must first
program the remote control for your specific cable box.)
With this connection, all channelscomeinto the TVthrough your cable box and only one
unscrambledsignal is sent to the TV,so you cannot use the dual picture features..If
some of your channelsare scrambled,but others are not, considerusing the "Cable Box
and Cable" connection on page 18 instead.
_o connect the cane box
1 Connect the CATV cable to the cable box's input jack.
Use a coaxial cable to connect the cable box's output jack to the
TV's VHF/UHF jack.
CAW
Coa×ancane
cane
2 VHF/UHF
_N
Notes on Usiog This Corrmectio_
Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3 or 4)
and then use the cable box to switch channels.
Set up the TV remote control Program the remote control. See "Programming the Remote Control" on
to operate the cable box pages 43-44.
Activate the remote control to Press %_d_CAB_ UNCHON_
operate the cable box
Prevent the accidental When using the cable box, you need the TV to stay on the channel the cable
switching of TV channels box is set to (usually channel 3 or 4). You can use the TV's Channel Fix
feature to lock in a specific channel. For details, see "Using the Channel
Menu" on page 72.