Sony FD Trinitron WEGA KV-30HS510 Operating Instructions Manual page 28

View (monitor) what is being
Press V/VDE 0 repeatedly
to select the VCR input (VIDEO 1 in the
recorded illustration above).
Set up the TV remote control If you have a non-Sony VCR, you must program the remote control. See
to operate the VCR(s) "Programming the Remote Control" on pages 43-44.
Activate the TV remote Open the outside cover, as shown on page 42. Then set the A/V slide switch
control to operate the VCR(s) to the position you programmed for the VCR.
Control VCR functioP, s with See "Operating a VCR" on page 62.
the TV remote control
Label video inputs to easily See the iP,structions for setting up Video Labels on page 78.
identify equipment connected
to the TV