Vcr And Cable Box - Sony FD Trinitron WEGA KV-30HS510 Operating Instructions Manual

VCR and Cable Box
IFo_ bestires_l_s vase t _ris ce_ectie_ i_:
_1 Your cable company scrambles some channels, such as premium
channels (which requires you to use a cable box), but does not
scramble all channels.
Withthis connection, youcanuseall thedualpicturefeatures.
_1 Use the TV remote control to change channels coming through
the cable box. (You must first program the remote control for
your specific cable box; see "Programming the Remote Control"
on page 43.)
_1 Use the TV remote control to change channels coming directly
into the TV's VHF/UHF jack. (The TV's tuner provides a better
signal than the cable box.)
_1 Record channels coming through the cable box and channels
coming directly into the TV.
To compeer a VCR a_d cable bex, y;_urr_eed:
_1 A splitter, which is a small, inexpensive device that you can
purchase at your local electronics store.
_1 Three coaxial cables.
_1 One A/V cable or one S VIDEO cable with audio cables.
_o ce_rr_ect t he VCRarid cable box
1 Connect the CATV cable to the single (input) jack of the splitter.
Use a coaxial cable to connect one of the splitter's two output
jacks to the TV's VHF/UHF jack.
3 Use a coaxial cable to connect the splitter's other output jack to
the cable box's input jack.
4 Use a coaxial cable to connect the cable box's output jack to the
VCR's RF input jack.
5 Use an A/V cable to connect the VCR's A/V output jacks to the
TV's A/V input jacks.
Run the Auto Setup program, as described in "Setting Up the
Channel List" on page 38.