Garmin GFC 600H Pilot's Manual page 60

Annunciations & Alerts
CAS MESSAGES
GMC 605H GMC 605H
Message
YAW FAIL
FCS FAIL
ADC FAIL
COLL FAIL
MAXSPEED
LOWSPEED
FTR
LMTQ FAIL
LMTQ OFF
PFT
PFT FAIL
MANIFEST
50
LED
Yaw axis servo has failed
•
FCS has failed
Air Data inputs to the GMC 605H have failed.
Functions dependent on air data (IAS, VS, and ALT
modes; and Overspeed & Underspeed Protection) will
not function and HFCS performance may be degraded.
Yaw axis will not function.
Collective position sensor has failed. Yaw axis
performance during collective changes will be
degraded. ALT, VS, IAS, GS, and GP performance during
collective changes will be degraded.
Overspeed protection or V
Lowspeed protection is active
Force Trim Release is being pressed
The Limit Cue function has failed. The pilot should
not expect tactile feedback for pitch/roll, normal
acceleration and VNE exceedances. Overspeed and
Lowspeed protection remains operational.
Limit Cue is off. The pilot should not expect tactile
feedback for pitch/roll, normal acceleration and VNE
exceedances. Overspeed and Lowspeed protection
remains operational.
Preflight test is in progress
•
Preflight test has failed
Incorrect Manifest versions. Maintenance is required.
Garmin GFC 600H Pilot's Guide
Description
limit cueing are active
ne
190-02081-04 Rev. A