Table of Contents
Advertisement
System Overview
Common
Control
Name
Force Trim
FTR
Release
Flight
Control
FCS DISC
System
Disconnect
Cyclic
TRIM
Beep Trim
LVL
Level Mode Cyclic (Blue)
8
Typical
Location/
Color
Servos Disengaged: Momentary press engages
the HFCS pitch and roll axes.
Any Engaged Mode: Press and hold will reduce
the control forces for the duration of time that
the switch is depressed. After 1 second the
system will annunciate 'FTR' as indication that
an extended press is active.
Cyclic (Black)
ATT Mode: Press and hold reduces control
forces and continuously synchronizes the pitch
and roll attitude reference. Upon release
synchronizes the pitch and roll attitude
reference to current values.
CPLD Flight Director Modes: Upon release
synchronizes the pitch reference (VS, ALT, IAS) to
the current value as applicable.
Momentary Press: Disengages all coupled Flight
Director Modes. Servos remain engaged in ATT
Mode.
Double momentary press OR press and hold for
Cyclic (Red)
1 second: Disengages the pitch, roll, and yaw
servos.
Press and hold for 10 seconds: Toggles limit
cue ON/OFF.
Single Press: Increments the HFCS references.
Press and Hold: Slews the HFCS references.
ATT Mode: The trim switch changes the
Cyclic (Black)
reference pitch (+/-) and roll (+/-) attitude.
CPLD Flight Director Modes: The trim switch
changes the reference altitude, vertical speed, or
indicated airspeed, as applicable.
Engages the pitch, roll, and optional yaw axis in
LVL Mode.
Garmin GFC 600H Pilot's Guide
Purpose
190-02081-04 Rev. A
Advertisement
Table of Contents
