VeriFone M425 Installation Manual page 14

NOTE
WARNING
Periodic Inspection
•
Additional accessories
Power supply and connectivity cables are part of additional accessories that can
be ordered separately.
Refer to Accessories section for part numbers and
Documentation section for ordering the required accessories.
4
Remove all plastic wrapping from the device and components.
5
Remove the clear protective film from the display.
6
Inspect the terminal for possible tampering; see how to identify signs of
tampering in the section
7
Save the shipping carton and packing material for future repacking or moving
of the device.
Do not use a tampered or damaged unit. The device comes equipped with
tamper-evident labels. If a label or component appears damaged, please notify
the shipping company and your Verifone service provider immediately.
Periodically inspect the terminal for possible tampering. Signs of tampering
include:
•
Overlays in the PIN pad area.
•
Wires protruding out of the device.
•
Foreign objects inserted into the smart card slot or magnetic stripe slot.
•
Any bumps in the casing below the mag stripe slot and any noticeable
additional mag stripe head from the side.
•
Signs of damage to the tamper-evident labels.
•
A Tamper Warning message on the device display.
If any device is found to have been tampered with, please remove it from service
immediately, keep it available for a potential forensics' investigation, and notify
your company security officer and your local Verifone representative or service
provider. To contact Verifone, please see
For terminals equipped with a privacy shield, perform daily inspections to ensure
that the privacy shield is installed and has not been removed.
Periodic Inspection.
Verifone Service and
Inside the Shipping Carton
Accessories and
Support.
M425 I
NSTALLATION
S
ETUP
14
G
UIDE