Maytag MHN33PD Installation Instructions Manual page 14

Code Explanation
6 07 Represents the number of Coins or Debit inputs
required to start the cycle. See Value of Coin 1.
Adjustable from 0 to 200.
PD models default setting is 7 - PR models
default setting is 0.
Increase from 0–200 by pressing the UPPER LEFT
keypad and decrease by pressing LOWER LEFT
keypad.
6 00 PR MODELS ONLY: Factory default of 0.
Press the LOWER MIDDLE keypad once to advance to next code.
7 11 WASH LENGTH
7 11 This is the number of minutes for WASH. Washer
comes from the factory preset with 11 minutes.
Choose from 9–17 minutes by pressing the LOWER
LEFT keypad.
Press the LOWER MIDDLE keypad once to advance to next code.
8 00 ADDITIONAL RINSE OPTION/EXIT SERVICE
MODE
NOTE: This only affects NORMAL and DELICATES cycles.
Additional Rinse is always enabled for POWERWASH.
8 00 Additional Rinse not selected 'OFF'.
Use this fi eld to exit Service Mode when entered
via the key dance.
Press and hold the LOWER LEFT keypad to exit
Service Mode.
8 Ar Additional Rinse selected 'ON'.
Use this fi eld to exit Service Mode when entered
via the key dance.
Press and hold the LOWER LEFT keypad to exit Service Mode.
Press the LOWER MIDDLE keypad once to advance to next code.
9 00 CYCLE COUNTER OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
9 00 Not Selected 'OFF'.
9 0C Selected 'ON' and not able to be deselected.
Press the LOWER RIGHT keypad 3 consecutive
times to select 'ON'. Once selected 'ON' it cannot
be deselected.
Press the LOWER MIDDLE keypad once to advance to next code.
1. 00 MONEY COUNTER OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
1. 00 Not Selected 'OFF'.
1. 00 Selected 'ON'.
Press the UPPER RIGHT keypad 3 consecutive
times to select 'ON' and 3 consecutive times to
remove (Not Selected 'OFF'.) Counter resets by
going from 'OFF' to 'ON'.
1 C0 Selected 'ON' and not able to be deselected.
To select 'ON' and not able to be deselected,
fi rst select 'ON', then within 2 seconds, press
the LOWER RIGHT keypad twice, LOWER LEFT
keypad once, and exit the set-up mode.
Press the LOWER MIDDLE keypad once to advance to next code.
2. 00 SPECIAL PRICING OPTIONS
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
2. 00 Not Selected 'OFF', and next available code will
be A.00.
2. SP Selected 'ON'. Press the UPPER RIGHT keypad
once for this selection.
14
Code Explanation
NOTE: If SPECIAL PRICING OPTION is selected, there is
access to codes '3.XX' through '9.XX'.
Press the LOWER MIDDLE keypad once to advance to next
code.
Options to use if SPECIAL PRICING is selected:
3. 07 NORMAL SPECIAL CYCLE AMOUNT TO
START
NORMAL
3. 07 Represents the number of Coins or Debit inputs
required to start the cycle. Value of Coin 1.
Adjustable from 0 to 200.
PD models default setting is 7 - PR models
default setting is 0.
Increase from 0–200 by pressing the UPPER LEFT
keypad and decrease by pressing LOWER LEFT
keypad. Factory default of 7.
3. 00 PR MODELS ONLY: Factory default of 0.
Press the LOWER MIDDLE keypad once to advance to next code.
3. 07 DELICATES SPECIAL CYCLE AMOUNT TO
START
DELICATES
3. 07 Represents the number of Coins or Debit inputs
required to start the cycle. See Value of Coin 1.
Adjustable from 0 to 200.
PD models default setting is 7 - PR models
default setting is 0.
Increase from 0–200 by pressing the UPPER LEFT
keypad and decrease by pressing LOWER LEFT
keypad.
3. 00 PR MODELS ONLY: Factory default of 0.
Press the LOWER MIDDLE keypad once to advance to next code.
3. 07 POWERWASH SPECIAL CYCLE AMOUNT TO
START
POWER
WASH
3. 07 Represents the number of Coins or Debit inputs
required to start the cycle. See Value of Coin 1.
Adjustable from 0 to 200.
PD models default setting is 7 - PR models
default setting is 0.
Increase from 0–200 by pressing the UPPER LEFT
keypad and decrease by pressing LOWER LEFT
keypad.
3. 00 PR MODELS ONLY: Factory default of 0.
Press the LOWER MIDDLE keypad once to advance to next code.
5. 00 TIME-OF-DAY CLOCK, MINUTES
5. 00 This is the TIME-OF-DAY CLOCK, minute setting;
select 0–59 minutes by pressing the LOWER LEFT
keypad.
Press the LOWER MIDDLE keypad once to advance to next code.
6. 00 TIME-OF-DAY CLOCK, HOURS
NOTE: Uses 24-hour clock.
6. 00 This is the TIME-OF-DAY CLOCK, hour setting;
select 0–23 hours by pressing the LOWER LEFT
keypad.
Press the LOWER MIDDLE keypad once to advance to next code.
7. 00 SPECIAL PRICE START HOUR
NOTE: Uses 24-hour clock.
7. 00 This is the start hour; 0–23 hours. Select START
HOUR by pressing the LOWER LEFT or UPPER
LEFT keypad.
Press the LOWER MIDDLE keypad once to advance to next code.
8. 00 SPECIAL PRICE STOP HOUR
NOTE: Uses 24-hour clock.