Operation - Kenwood TS-670 Instruction Manual

4. OPERATION
@ 4-1 Connection
Make connection of TS-670 as shown below.
Headphones
Use headphones of 4 to 162 impedance.
Stereo-type headphones can also be used.
on 8
Voice controller VOX-4 REMOTE commectot
a=
GND terminal External speaker
It is recommended that a ground lead be con- Key Besides the built-in speaker, an external
nected to the GND terminal at the rear of the For CW operation, connect your key to the speaker can also be used. Connect to the rear
set to prevent the possibility
of electric KEY jack at the rear. Use shielded cable.
EXT SP jack using the supplied plug.
shock, TVI and BCI. Use as short and heavy a
lead as possible.
position and use the upper connector. When separate antennas are used,
PS-20
Wall AC outlet
Black © | @ Red
M-type connector
—_>
—
M-type connector
DC power terminal