Kenwood TS-670 Instruction Manual page 9

@ 4-3 CONNECTION OF MOBILE ANTENNA AND POWER SUPPLY
ANT When a 7-50 MHz common antenna is used, set the switch to the 7-50
somo
position and use the upper connector. When separate antennas are used,
728 7-50 set the switch to the 50/7-28 position and connect the 50 MHz antenna to
the lower connector and the 7-28 MHz antenna to the upper connector.
50
M-type connector
—,,> >
—ZJ> =
M-type conector
Take power directly from
the battery terminal.
Battery (12 V)
Mobile operation
NOTE:
Before connecting and disconnecting the power connec-
tor, be sure to turn off the power switches of the
TS-670 and the PS-20.