Table of Contents
Advertisement
3.3 Parallel Interface Port
Data can be sent and received by parallel transmissions.
Specifications
Transmission method
Receive buffer size
Transmission mode
Signal level
Connector
Connecting Interface Cables
1.
Turn the power off.
2.
Confirm the top and bottom of the interface cable before connecting it to the
connector.
3.
Firmly insert the other end of the connector into the interface connector of the host
computer.
CAUTION
Always hold cables by the connector as you disconnect them.
Install the interface cable so it does not catch on people's feet, etc.
Do not connect multiple interfaces at the same time.
8-bit parallel data
16kByte
Compatible mode/nibble mode/ECP mode
IEEE 1284 compliant
Amphenol 36 pin
— 23 —
Advertisement
Table of Contents
