Operation And Adjustment - Pro-Form CROSSWALK 397 User Manual

Treadmill exerciser
Hide thumbs Also See for CROSSWALK 397:
Table of Contents

Advertisement

OPERATION
AND ADJUSTMENT
NOW TO PLUG IN THE POWER
CORD
Your treadmill,like other electronic equipment, can be
damaged by sudden voltagechanges in your home's
power, To decrease the risk of damaging your
treadmill, always use a surge suppressor with your
treadmill (see drawing 1 atthe right), To purchase
a surge suppressor, see precaution 12 on page 3,
Use only a single-outlet
surge
suppressor
that is
UL 1449 listed as a transient
voltage
surge
sup-
pressor
(T'v'SS). The surge suppressor
must have
a UL suppressed
voltage
rating of 400 volts
or less
and a rain[mum
surge dissipation
of 450 joules,
The surge
suppressor
must be electrically
rated for
120 volts
AC and 15 amps, There
must be a moni-
toring
tight
on the surge
suppressor
to indicate
whether
it is functioning
properly.
Failure
to use a
properly-functioning
surge suppressor
could dam-
age the control
system
of the treadmill
(see
precau-
tion 13 on page 3).
This
product
must be grounded,
If it should mal-
function or break down,
grounding
provides a path
of ]east resistance
for electric current to reduce the
risk of electric shock. This product's power card has
an equipment-grounding
conductor and a grounding
plug. Plug the power
cord into a surge
suppressor,
and plug the surge
suppressor
into an appropri-
ate outlet
that is properly
installed
and grounded
in accordance
with el[ Iota|
codes
and ordinances,
IMPORTANT:
The treadmill
is not compatible
with
GFCl*equipped
outlets
and may not be compatible
wLLh AFCI-equipped
outlets,
This product is for use on a nominal 120-volt
circuit
(see drawing
1), A temporary
adapter
maybe
used to
connect the surge
suppressor to a 2-pole receptacle
if
a properly-grounded
outlet is not available
(see
drawing 2),
__Grounded Outlet Box
_ _.
l. _l_:_
-Surge Suppress°r
11 _
r-_l_ ;=B_;J Grounding Pin
Grounded OuUet
Grounding Piug_'_
GroundedOutlet Box
f_ uj I
Adapter
_
i
Surge buppressor
"Grounding Plug
The temporary adapter shouldbe used only untila
properly-groundedoutlet(see drawing 1) can be in-
stalied by a qualifiedelectrician,
The green-coloreddgid ear, lug, or the like extend-
ing from the adapter must be connected to a perma-
nent ground suchas a groundedoutlet box cover,
The adapter must be held in place by a metal screw.
Some 2-pole receptacle outlet box covers are not
grounded. Contact a qualified electrician to deter-
mine if the outlet box cover is grounded before
using an adapter.
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

831.24843.0

Table of Contents