Safety Guidelines For Cordless Screwdrivers; Original Accessories/Attachments; Safety Guidelines For Battery Chargers - Parkside PBSPA 12 D4 Translation Of The Original Instructions

Safety guidelines for cordless screw-
drivers
Safety instructions for all work
WARNING!
■ Hold the power tool by the insulated gripping
surfaces when performing an operation
where the screw or attached tool could
come into contact with hidden wiring.
Contact between the screw or attached tool
and a live wire may cause exposed metal
parts of the power tool to become live and
give the operator an electric shock.
Safety information for using long drill bits
■ Do not use a higher rotational speed than
the maximum permissible speed. At higher
speeds, the drill bit can bend slightly if allowed
to turn freely without being in contact with the
workpiece, and this can lead to injuries.
■ Always start drilling at a low speed and with
the drill bit in contact with the workpiece. At
higher speeds, the drill bit can bend slightly if
allowed to turn freely without being in contact
with the workpiece, and this can lead to injuries.
■ Do not exert excessive pressure and only
along the length of the drill bit (no lateral
pressure). Drill bits can bend and break which
can lead to a loss of control and injuries.

Original accessories/attachments

■ Use only the accessories and additional
equipment that are specified in the operating
instructions and are compatible with the
appliance.
6
GB │ IE
│
■
Safety guidelines for battery
chargers
This appliance may be used
■
by children aged 8 years and
above and by persons with limit-
ed physical, sensory or mental
capabilities or lack of experience
and knowledge, provided that
they are under supervision or
have been told how to use the
appliance safely and are aware
of the potential risks. Do not
allow children to play with the
appliance. Cleaning and user
maintenance tasks may not be
carried out by children unless
they are supervised.
The charger is suitable for indoor use only.
WARNING!
■ To avoid potential risks, damaged power
cables should be replaced by the manufac-
turer, their customer service department or
a similarly qualified person.
ATTENTION!
► This charger can only charge the following
batteries: PAPK 12 A1/PAPK 12 A2/
PAPK 12 A3/PAPK 12 B1/PAPK 12 B3/
PAPK 12 C1/PAPK 12 D1.
► An up-to-date battery compatibility list can
be found at www.lidl.de/akku.
PBSPA 12 D4