Dividing The Selected File (Divide); Increasing The Perceived Overall Sound Pressure To Enhance Listenability (Level Alignment) - Tascam DR-05 Reference Manual

7-Quick Operations

Dividing the selected file (DIVIDE)

A recorded file can be divided into two at a specified
position.
1 Select a file to be divided using the . or /
button or the BROWSE screen.
2 While the Home screen is open when stopped,
press the QUICK button to show the Quick menu
screen.
3 Use the + or − button to select DIVIDE, and press
the 7 button.
DIVIDE screen appears.
4 Use the + or − button to select to specify the
position for file division, and press the RECORD
[0] button.
The following pop-up window appears.
5 Press the 7 button to divide the file.
Or press the ¤ (HOME) [8] button to return to
the DIVIDE screen without dividing the file.
NOTE
When the DIVIDE screen is open, you can press the 7
•
button and set the divide position while playing the track.
When the DIVIDE screen is open, press the 7 button
•
to pause/resume playback and press the . or /
button to move to the beginning or the end of the
track. Adjust the position for file division using the + or
− button. Press and hold the + or − button to move the
position continuously.
• After dividing a file, two new files with "_a" and "_b"
added to the end of the original file name are created.
For example if the original filename is "DR0000_0000.
wav" then the new files will be named "DR0000_0000_a.
wav" (the recording before the division point) and
"DR0000_0000_b.wav" (the recording after the division
point).
42
TASCAM DR-05
CAUTION
• MP3 files cannot be divided.
• If the microSD card has insufficient open space, division
might not be possible.
• Division is not possible if the file name would become
more than 200 characters long.
• Division is not possible if a file that already exists has the
same name as the name that would be given to a new
file created by division.
TIP
Add marks during recording at positions where you want
to divide a file. (See "Mark function" on page 26.)
Increasing the perceived overall
sound pressure to enhance
listenability (Level Alignment)
If the playback sound is very small and indiscernible,
the perceived overall sound pressure can be increased
to enhance listenability. (Level Alignment)
1 While the Home screen is open when stopped or
playing back, press the QUICK button to open
the Quick menu screen.
When stopped
2 Use the + or − button to select LEVEL ALIGN and
press the 7 button.
3 A screen to enable/disable the level alignment
function appears.
4 Use the + or − button to select ON, and press
the 7 button to enable the level alignment
function.
Or select OFF and press the 7 button to disable
the level alignment function.
NOTE
The level alignment function may not be able to achieve
sufficient effect depending on the source of the sound
(example: a music file whose sound pressure has been
already adjusted).
During playback