Using Menus; Basic Operation - Tascam DR-05 Reference Manual

2–Names and Functions of Parts

Using menus

Use the MENU screen to make various settings.
Example: setting the playback area
1 Press the MENU button to open the MENU screen.
2 Use the + or – button to select a menu item
(highlighted), and use the 7 button to move to
various settings screens.
Example: PLAY SETTING screen
3 Use the + or – button to select a menu item
(highlighted) to be set.
Example: AREA is selected.
4 Use the / or 7 button to move the cursor to
highlight the value of the setting.
5 Use the + or – button to change the setting.
6 Press the . button to set a different item in
the same menu.
This enables you to select a new item. Use the +
or − button again to select an item to be set.
7 Repeat step 3 to 6 as necessary to set each item.
8 To open the MENU screen, press the MENU button.
To return to the Home screen (or OTHERS submenu
screen), press the ¤ (HOME) [8] button.
12
TASCAM DR-05

Basic operation

Use the following buttons to operate the various
screens.
MENU button:
Opens the MENU screen.
PB CONT button:
This opens the Playback Control screen.
¤ (HOME) [8] button:
When any other screen is open, press this to return
to the Home screen. Use this to answer "NO" to a
confirmation message.
7 button:
Use this to confirm the selection of a setting item or
to answer "YES" to a confirmation message.
/ button:
Use this to move the cursor (the highlighted area)
to the right on the screen, and to open folders on
the BROWSE screen.
/button:
Use this to move the cursor (the highlighted area)
to the left on the screen, and to close folders on the
BROWSE screen.
+ button:
Use this to move the cursor (the highlighted area)
upward on the screen, or increase values.
– button:
Use this to move the cursor (the highlighted area)
downward on the screen, or decrease values.
QUICKbutton:
This opens the Quick menu.
A popup menu is turned on or off in the BROWSE
screen or PLAYLIST screen.