Playback Control Screen; Menu Item List - Tascam DR-05 Reference Manual

Playback Control screen

The Playback Control screen is displayed if the PB
CONT button is pressed during playback or when
playback is stopped.
Recording cannot be performed while this screen is
displayed. Press the . or / button to skip to the
I/O point or the beginning/end, instead of the previous
or next file.
1 Loop playback status
The icon is displayed when loop playback is
enabled.
2 Playback speed
Playback speed as compared with the normal
speed is shown.
VSA shown on the left to indicate that the VSA
(variable speed audition: enables the tempo to be
changed without changing the pitch) function is
enabled.
3 Playback position display
The current playback position is shown by a bar. As
playback progresses, the bar extends to the right.
4 Loop playback IN (starting) and OUT
(ending) points
The set starting and ending points of the loop are
shown.
The icon appears at the playback position on
the bar when the starting point is set.
The icon appears at the playback position on
the bar when the ending point is set.
5 Available buttons
The buttons available in the Playback Control
screen are as follows.
MARK : Creates or deletes an IN or OUT point.
MENU : Switch over between ON and OFF status of
the loop playback function.
NOTE
Unlike the other screens, the QUICK button in this screen
works to display the quick menu containing only the
LEVEL ALIGN function, and no other functions will be
available.
2–Names and Functions of Parts

Menu item list

This list provides an overview of the various menu
items.
Menu item
REC SETTING
PLAY SETTING
BROWSE
SPEAKER
OTHERS
The OTHERS submenu appears when OTHERS is selected
in the MENU screen. The menu items contained are as
follows.
INFORMATION
MONITOR MIX
TUNER
EFFECT
FILE NAME
DATE/TIME
SYSTEM
CAUTION
• When recording or in recording standby, only the
following screens and items are shown.
REC SETTING screen: MIC POWER, LOW CUT and AUTO
REC items (AUTO REC setting cannot be changed)
MONITOR MIX screen: INPUT and PB INPUT items
(INPUT setting cannot be changed)
EFFECT screen: all items
The MENU button is disabled in the Playback Control
•
screen, but works to change over between ON and OFF
status of the loop playback function. (See "Repeated
Playback of Selection (Loop Playback)" on page 37.)
Function
Recording mode settings
Play area select, repeat
setting, playback equalizer,
jump-back settings
microSD card file and folder
operations
ON/OFF status of built-in
speaker
OTHERS submenu display
Information about the file,
microSD card, and system
Monitor Mix settings
Tuner settings
Effect settings
File name settings
Date and time settings
Various system settings
TASCAM DR-05
Pages
18
32,
36,
38,
39
30
16
Next
table
46
22
44
43
48
15
47
11