Preparing A Microsd Card For Use; Using The Built-In Speaker - Tascam DR-05 Reference Manual

3–Preparation

Preparing a microSD card for use

In order to use a microSD card in this unit, you must
format it first.
1 Confirm that a microSD card is installed and turn
the power ON.
2 The following message appears when a new card
or a card formatted for use with another device
is installed in the unit.
3 Press the 7 button to start formatting.
4 When formatting ends, the Home screen opens.
You can also reformat the card in this unit at any
time. (See "System Settings and Formatting" on
page 47.)
CAUTION
• When formatting a card, the unit should be operating on
AC power supplied through the PS-P520E adapter (sold
separately), USB bus power supplied from a computer, or
batteries with sufficient remaining power.
• Formatting a card erases all the data on it.
16
TASCAM DR-05

Using the built-in speaker

Enable SPEAKER on the MENU screen to allow the unit to
play over the built-in speaker.
1 Press the MENU button to open the MENU screen.
2 Use the + or – button to select the SPEAKER and
press the 7 button.
The SPEAKER screen is displayed.
3 Use the + or – button to select ON.
4 When finished, press the ¤ (HOME) [8]
button to return to the Home screen.
NOTE
Even if SPEAKER is enabled, the unit will not play
through the speaker when the unit is recording sound,
in recording standby, or muted with headphones or
external speaker system connected.