Setting The Date And Time; Inserting And Removing Microsd Cards; Inserting The Microsd Card; Removing The Card - Tascam DR-05 Reference Manual

Setting the date and time

Using its internal clock, this unit remembers the date
and time when a file is recorded.
1 Press the MENU button to open the MENU screen.
2 Use the + or – button to select the OTHERS menu
item (highlighted), and press the 7 button.
The OTHERS screen is displayed.
3 Use the + or – button to select the DATE/TIME
menu item, and press the 7 button.
The DATE/TIME screen is displayed.
4 Press the . or / button to move the cursor
(highlighted area), and use the + or – button to
change values.
5 Press the 7 button to confirm the change and
return to the OTHERS screen.
NOTE
You can set the unit to automatically add the date to file
names. (See "Setting the format of file names" on page
48.)
CAUTION
The date and time setting can only be maintained for a
few minutes if the unit is not powered from batteries or
through the AC adaptor TASCAM PS-P520E or the USB
cable. When using batteries, replace them before they
completely lose power.
Inserting and removing microSD
cards

Inserting the microSD card

NOTE
A microSD card is already installed when the unit is
shipped from the factory. If you want to use this card to
record and play tracks, there is no need to reinstall it.
1 Open the microSD slot cover on the right side
panel.
2 Insert the microSD Card into the slot as shown in
the following illustration until it clicks into place.

Removing the card

1 Open the microSD slot cover on the right side
panel.
2 Press the microSD card in gently and then
release it to allow it to come out.
CAUTION
• Do not remove the microSD card from the unit when it is
connected to a computer by USB.
• microSD cards that meet microSD or microSDHC
standards can be used with this unit.
• A list of microSD cards that have been confirmed to
work with this unit can be found on the TEAC Global Site
(http://teac-global.com/).
3–Preparation
TASCAM DR-05
15