Panasonic Digital Palmcorder PalmSight PV-DV800 Operating Instructions Manual page 76

Notes On Operations
Cleaning EVF (Electronic Viewfinder)
1 Slide the Viewfinder backward to its fully
expanded position and then tilt it
upward.
2 Remove the EVF Eyepiece 2 screws
with a screwdriver (+).
3 Turn the Eyepiece counterclockwise 1/8
of a turn.
Á Pull the Eyepiece free.
Remove any lint or dust particles with a
soft clean cloth being careful not to
scratch the glass surfaces.
5 To re-install the Eyepiece
Line up the marks on the Eyepiece with
the grooves inside the EVF shaft and
attach. Turn it clockwise 1/8 of a turn to
lock in place.
6 Replace the EVF Eyepiece screws and
tighten with a screwdriver.
* If you lose EVF Eyepiece screw, order
Part No.XQN2+BV4FXK for
replacement.
76 For assistance, call 1-800-211-PANA(7262)