Panasonic Digital Palmcorder PalmSight PV-DV800 Operating Instructions Manual page 32

Camera Recording
Recording Check
To playback the final few seconds of the
last recorded scene in the Recording
Pause Mode.
TIT
l
TIEDET
A
7 i."
You can visually search for scenes in
CAMERA mode to maintain proper
continuity when taping.
RECORD/PAUSE POWER Switch
Button
EDIT EDIT
SEARCH << SEARCH PP
l
MI
¿GUIADA
32
Press EDIT SEARCH dá briefly in the
recording Pause Mode.
The [CHK] indication appears.
After checking, the Movie Camera returns
to the Recording Pause Mode.
* For Recording Check, the Movie Camera
must be in the same mode (SP or LP) as
used for recording, otherwise the
playback picture is distorted.
1 Set POWER to CAMERA.
* The POWER lamp lights red.
* Be sure POWER is fully turned to
CAMERA position.
2 In RECORD/PAUSE mode, hold
down EDIT SEARCH P to
perform a forward visual search or
EDIT SEARCH «Kd to perform
a reverse visual search. Releasing the
button stops the search.
3 Press RECORD/PAUSE to continue
recording.
* During Edit Search, the picture will have
a mosaic pattern. The sound will be
muted when using reverse visual search.
* Make sure the SP/LP tape speed setting
is the same as the recording to eliminate
distortion during edit search.
For assistance, call 1-800-211-PANA(7262)