Panasonic Digital Palmcorder PalmSight PV-DV800 Operating Instructions Manual page 33

Camera Recording / Remote Control
Blank Search 1
You can go directly to a blank portion of Set the POWER to VCR.
tape and start recording exactly where you * The POWER lamp lights red.
left off. * Be sure POWER is fully turned to
VCR position.
Press MENU to display the VCR
mode menu screen.
MENU Button JOG KEY
: Rotate JOG KEY to select [4 W;M
, then press JOG KEY to
display the VCR PLAY MODE menu CJ
screen.
Q
o
: Rotate JOG KEY to select EXIJA] Brey
ALS in the VCR PLAY MODE menu (page
ATO 5 E
ant l ]À Press JOG KEY to select ON. (D
M dins * "BLANK" will appear on the screen. to
Sx» L 0h10m15825t BLANK =.
POWER
Switch
R0:12
9
JAN 2 1999
Remote Control (Optional, page 74)
You can operate the major functions of your Palmcorder from up to approximately 16 feet
(5 m) away (indoors). Aim the IR Remote Control toward the front of the Palmcorder and
press the desired buttons (Remote Sensor is located under the lens).
Controlled Functions
Set POWER to CAMERA. Tel e (Zoom) (page 51)
To operate VCR functions: Wide (Zoom) (page 51)
Set POWER to VCR.
Date/Time (page 27)
Reset (page 60)
PhotoShot (page 52)
Display On TV(page 40)
Counter/Time Code (page 26)
Audio Dubbing (page 59)
Record (page 63)
Menu (page 20)
Play (page 35)
FF/Search (page 36)
REW/Search (page 36)
Pause/Select (pages 20, 36)
Stop/Set (pages 20, 35)
Slow/Frame Advance (Forward) (pages 36, 38)
Slow/Frame Advance (Backward) (pages 36, 38)
Index Search (Forward) (page 39)
Index Search (Backward) (page 39)
Speaker Volume (page 35)
Remote Sensor
33