Table of Contents
Advertisement
Cassette Information
Cassette Insertion
TAPE EJECT
Switch
PUSH TO
CLOSE
mark
Before you begin...
* Connect the Palmcorder to a power
source (pages 12, 13).
1 Slide TAPE EJECT to open the
Cassette Compartment Cover.
2 Insert a cassette with its window side
facing up.
3 Press PUSH TO CLOSE mark to
close the Cassette Compartment
Cover.
Cassette Compartment
Cover
Cassette Ejection
e |f the Palmcorder is connected to a power
source, the cassette can be inserted and
ejected without turning the Palmcorder on.
Hint for recording position when
inserting cassette
* When you insert a cassette that is
partially recorded, use the Edit Search
Function to search for the position from
which you want to record again.
Especially when you want to record again
on a cassette that is already fully
recorded, be sure to first locate the
position where you want to add the new
recording, before starting to record.
1 Slide TAPE EJECT to open the
Cassette Compartment Cover.
2 Pull the cassette tape straight out.
Note:
+ If hand strap is tight it may prevent Cassette Compartment Cover
from fully opening for tape insert or eject. Loosen hand strap if
necessary.
* When inserting the cassette, make sure it faces in the right direction
and then push in completely.
For assistance, call 1-800-211-PANA(7262)
Advertisement
Table of Contents
