How To Connect The Gk-3B - Roland GK-3B Owner's Manual

Divided pickup

Hide thumbs Also See for GK-3B:

Table of Contents

'How to Connect the GK-3B

To prevent malfunction and/or damage to speakers

* — The GK cable is a locking cable. When disconnecting

or other devices, always turn down the volume, and

the cable, do not pull on it with undue force, but

turn off the power on all devices before making any

instead release the lock and gently disconnect the

connections.

cable. You can disconnect the cable simply and

When all devices are properly connected, turn on the

easily by holding down the locking portion with

power to the various devices in the order specified

your thumb and gently pulling on the plug.

below. Turning on devices in the wrong order may

result in malfunction and/or damage to speakers and

other devices.

1. Make sure that the power to the device

being connected is turned off, then

connect the device to the GK-3B's GK

connector using the GK cable.

Before playing, be sure to wrap the cable around the

guitar strap near the end pin. This will prevent the

excess strain on the cable that can end up damaging

the bass or the GK-3B.

GK device

Connect the GK-3B only with dedicated GK

cable (supplied with Roland GK-compatible

devices and optional GK cables sold by

Roland). Use of any other cable may result in

damage or malfunction.

Table of Contents