Table of Contents
Advertisement
From initial settings to recording
Recording audio
1. Connect your instrument or microphone
In order to record audio, you'll connect your instrument or microphone to the V-STUDIO 20.
2. Create a new file
1.
Launch Guitar Tracks 4.
2.
From the
3.
In the Name field of the New Project File dialog box, enter the name of the song that you want to create.
fig.FileNew.eps
A new project will be created.
In this example we're going to record on track 1.
3. Select the input source
Now we'll configure input settings in Guitar Tracks 4 as appropriate for the input you connected.
1.
From the top panel of the VS-20 Hardware, choose the input according to the table below:
Source
Record onboard mic (MIC 1) in stereo
Record MIC 2
Record LINE L/R in stereo
Record GUITAR/BASS
Record GUITAR/BASS on the left channel, and MIC 2 on
the right channel (Simultaneous Recording)
28
|
to open the New Project File dialog box.
File
New
Selected device
Press [MIC 1]
Press [MIC 2]
Press [LINE]
Press [GUITAR/BASS]
Hold [MIC 2] and press [GUITAR/BASS]
Advertisement
Table of Contents
