Sony SRS-XV500 Help Manual page 64

Help Guide
Wireless Speaker
SRS-XV500
Enjoying wireless playback using multiple speakers (Party Connect function)
You can connect multiple speakers (up to 100 speakers) compatible with the Party Connect function via BLUETOOTH
connections and enjoy music playback.
Devices compatible with the Wireless Party Chain function are not applicable for connection.
*
Devices compatible with the Party Connect function:
LSPX-S3, SRS-XP700, SRS-XP500, SRS-XG500, SRS-XG300, SRS-XB43, SRS-XB33, SRS-XB23, SRS-XE300, SRS-
XE200, SRS-XV900, SRS-XV800, SRS-XV500
*
Depending on your country or region, some of the compatible devices are not available for purchase.
Before operating the speaker, make sure of the following:
Update the pre-installed software to the latest version on each and every speaker to connect for the function.
(For details about the update procedure, see
When setting up the speakers for the Party Connect function, make sure that all of the speakers to connect for the
function are located within 1 m (3.2 ft). Stop music playback if it is in progress.
When playing music, make sure that all of the devices to connect for the function are located within 30 m (98.4 ft) in
your line of sight.
Maximum communication range may shorten under the following conditions.
There is an obstacle such as a person, metal, or wall between the speaker and BLUETOOTH device.
A wireless LAN device is in use near the speaker.
A microwave oven is in use near the speaker.
A device that generates electromagnetic radiation is in use near the speaker.
Use "Sony | Music Center" to set up the speaker for the Party Connect function.
1
For details about "Sony | Music Center," refer to the following URL:
https://www.sony.net/smcqa/
Start playback on the BLUETOOTH device, and adjust the volume to moderate level.
2
The same music is played from all speakers.
When adjusting the volume on the BLUETOOTH device or the speaker connected with the device (the speaker set
up as the first one), the volumes of all speakers are automatically adjusted. For other speakers (the second or later
speaker set), you can also adjust the volume on each other.
To change the connected BLUETOOTH device or speaker or to terminate the Party Connect function
Stop music playback in advance.
Hint
The lighting mode of the speaker varies depending on the type of the speaker that is set up as the first speaker.
When using the Party Connect function, the codec automatically switches to SBC.
Updating the pre-installed
64
software.)