Sony SRS-XV500 Help Manual page 17

Hide thumbs Also See for SRS-XV500:

Table of Contents

Help Guide

Wireless Speaker

SRS-XV500

Charging a USB device such as a smartphone or iPhone

You can charge a USB device, such as a smartphone or iPhone, by connecting it to the speaker via USB. Even if the

speaker is not connected to an AC outlet, its built-in battery can supply power to a USB device.

Connect a USB device, such as a smartphone or an iPhone, to the PLAY/CHARGE OUTPUT port (USB) with

a USB cable (commercially available).

Turn on the speaker.

The

(power) indicator lights up in green and the speaker starts supplying power to the connected USB device for

battery charging.

Note

While the speaker is supplying power to the other device, the Auto Standby function is turned off.

Turning off the speaker stops power supply to the connected USB device.

The slowly flashing CHARGE indicator indicates that the built-in battery is running low and needs to be charged. While in this

state, the speaker is not capable of supplying power to other devices and may automatically turn off.

Do not charge the speaker's built-in battery in places where the speaker is likely to have water splashed on it. The supplied AC

power cord (mains lead) as well as the jacks and ports (AC IN/USB/AUDIO IN/MIC/GUITAR) behind the cap are not designed for

water resistant.

After you disconnect the USB cable from the speaker upon completion of battery charging, be sure to close the cap securely. The

cap plays a very important role in maintenance of the water resistant performance.

Yy7855e