Table of Contents
Advertisement
Help Guide
Wireless Speaker
SRS-XV500
Listening to music of a device via a BLUETOOTH connection
You can enjoy listening to music of a BLUETOOTH device and operate it by the speaker via a BLUETOOTH connection
if it supports the following BLUETOOTH profiles.
A2DP (Advanced Audio Distribution Profile)
Enables you to enjoy high-quality audio contents wirelessly.
AVRCP (Audio Video Remote Control Profile)
Enables you to adjust the volume and operate to play, pause or skip to the beginning of the next/current track.
Operations may vary depending on the BLUETOOTH device. Refer also to the operating instructions supplied with the
BLUETOOTH device.
Note
Make sure beforehand that the volume on the BLUETOOTH device and speaker are set to a moderate level to avoid sudden loud
sound output from the speaker.
Depending on the BLUETOOTH device, adjusting the volume of the speaker may not be possible on the BLUETOOTH device
while playback on the device is stopped/paused.
Connect the speaker with the BLUETOOTH device.
1
When a BLUETOOTH connection is established, you hear the notification sound from the speaker and the activity
of the
(BLUETOOTH) indicator changes from flashing to lit.
If the speaker is in any mode other than BLUETOOTH mode for audio source selection, tap (BLUETOOTH)
2
on the speaker.
Note
Even after a connection is established with a BLUETOOTH device, audio from the connected BLUETOOTH device does
not come out from the speaker unless the speaker is in BLUETOOTH mode.
49
Advertisement
Table of Contents
