Table of Contents
Advertisement
Help Guide
Wireless Speaker
SRS-XV500
Connecting with a computer via a BLUETOOTH connection (Mac)
Pairing is the process required to mutually register the information on BLUETOOTH devices to be connected wirelessly.
It is necessary to pair a device with the speaker to be able to make a BLUETOOTH connection for the first time. Perform
the same procedures to pair to other devices.
The pairing information is stored on the speaker when the speaker is turned off.
Supported operation systems
macOS Monterey (version 12.6)
Do the following before starting.
Place your computer within 1 m (3.2 ft) of the speaker.
Connect the speaker to an AC outlet with the supplied AC power cord (mains lead). Or charge the rechargeable built-
in battery sufficiently.
Prepare the operating instructions supplied with the computer for reference.
To avoid any sudden loud sound output from the speaker, turn down the volume of both the computer and the
speaker or stop music playback.
Set the speaker of your computer to on.
If the speaker of your computer is set to
When the speaker of your computer is set to on:
Turn on the speaker.
1
Tap (BLUETOOTH) on the speaker.
2
(mute), sound does not output on the BLUETOOTH speaker.
38
Advertisement
Table of Contents
