How To Install The Screen Copy Program - IBM 3852-2 Hardware Reference Manual

Each of these programs is specially designed and
will only work with the equipment indicated. If
you do not know what hardware you have,
consult your place of purchase.
How to Install the Screen Copy
Program
To install the Screen Copy program, insert your
DOS
diskette into your
A
disk drive. (The
A
drive
is usually the one on the left or the top.) Close
the door to the disk drive. (Turn the diskette
slot handle to the vertical (closed) position for
the
IBM
Portable Personal Computer or the PCjr.)
Turn your workstation On.
When the
DOS
prompt appears, remove your
DOS
diskette, and insert the
IBM
supplied diskette.
Close the door or set the diskette slot handle as
above.
Copy the appropriate program
(PRT3S52A.COM,
PRT3852B.COM,
or
PRT3852C.COM)
to your system
diskette. Your
DOS
book will explain how to do
this. For example, after the
DOS
prompt enter
copy a:PRT3852A.COM b:
to use the Screen Copy program if you have a
color graphics adapter or a monochrome adapter.
U
(1
Th1-- D
1