Table of Contents
Advertisement
ESC W
Format: X'1B57'
+
TOGGLE
Begins or ends continuous double wide
printing. Use
TOGGLE
value of 1 to
begin printing; 0 to end.
E$C 0
Format: X'1B30'
Sets line spacing to 1/8 inch (8 lines per
E$C 2
Format: X'1B32'
Sets line spacing to 1/6 inch (6 lines per
inch).
ESC 5
Format: X'1B35'
+
MODE
Sets automatic line feed on
CR.
Use
MODE
value of 1 to turn automatic line
feed On; use 0 to turn it Off. The
printer will line-feed each time a code
that indicates the end of a line, such as
CR,
is received.
ESC 6
Format: X'1B36'
Selects character set 2.
ESC 7
Format: X'1B37'
Selects character set 1.
ESC—
Format: X'lB2Dnn'
nn value of 1 turns on underscore;
value of 0 turns off underscore.
EUS
Format: X'1B5B450000'
Terminates either
ESC—
or
BUS
underscoring.
FF
Format: X'OC'
Advances the paper to the top of the
next form (page).
CR
is implied.
Format: X'09'
Moves the print head to the next
horizontal tab stop. Tab stops are set
with the
ESC D
control. When the
printer is turned on, tabs are set every
inch).
HT
Advertisement
Table of Contents
