Table of Contents
Advertisement
1. Is the Power indicator light On?
NO
--
Continue with thi step.
YES
--
Go to Step 3 on page 4-3.
Make sure your printer power cord is
properly connected.
a. Make sure any other equipment plugged
into the same wall outlet will operate.
5. Make sure the printer power cord is
plugged into the back of the printer.
c. Make sure the printer is completely
plugged into a wall socket.
d. Make sure the wall outlet does not turn
off with the room lights.
e. Plug the printer into a different wall
outlet.
f.
Exchange the power cord with your
workstation power cord.
2. Make sure the printer is turned On. Did you
find any problem while following the
preceding steps?
NO
- -
Have your printer serviced.
YES
- -
Correct the problem and try to
print again.
4-9
Advertisement
Table of Contents
