General Information
Any combination of XM30, XM32, XM70, or XM90 Expansion Modules are supported. A maximum of
two XM30, or XM32 modules (in aggregate) can be powered from the DC power of the IMC link. XM70
and XM90 modules require an AC power supply.
For more information, refer to the Tracer XM30, XM32, XM70,and XM90 Expansion Modules
Installation, Operations, and Maintenance manual BAS-SVX46*-EN.
Accessories
See the Symbio 500 Product Data Sheet (BAS-PRD057*-EN) for details on accessories.
Required Tools
The following tools are required to install and initially test the Symbio 500 controller:
•
•
•
•
Symbio User Interface (UI)
The Symbio 500 controller offers a web-based user interface (UI) used for installation, integration, and
service tasks.
Connecting to Symbio UI
1. Connect a laptop to the USB service tool port using a USB 2.0 A to B cable. Symbio UI can only be
2. Open a web browser and connect to http://198.80.18.1 to access Symbio UI.
12
Drill and appropriate bits for DIN rail mounting
A #2 Phillips-head screwdriver
A 1/8 inch (3.2 mm) wide, flat-bladed screwdriver
Digital multimeter
accessed over USB connection.
BAS-SVX090B-EN