Kenwood KRC-603C Instruction Manual page 9

Basic operations
iSee page 61
Power
Turning on the power:
Press one of the following buttons TAPf ( or TUN
Turn the power on before completing the frU-i.vsng procedures
Turning off the power:
Press the PWR OFT button for at least orm ce- onrj
Selecting standby mode:
Press the TUN button repeatedly and switch to "ALL OFF."
When "ALL OFF" is displayed, the standby mode is activated.
The standby mode turns all functions off while leaving the
power to the unit on Use this mode when you want to have
the display illuminated but don't want to listen to anything
Volume
Increasing Volume:
Press the /s button to turn up the volume.
Decreasing Volume:
Press the v button to turn down the volume.
Attenuator
This function allows you to turn down the volume quickly.
Turning Attenuator On/Off:
Press the ATT button to switch the attenuator on and off.
When the attenuator is on, the ATT indicator blinks.
When the attenuator is off, the volume returns to the original
level.
Turning the volume all the way down deactivates the attenuator
function.
Loudness
This function amplifies low and high tones when the volume
is turned down.
The LOUD indicator lights up when the loudness function is
on.
Turning Loudness On/Off:
Press the LOUD button to switch the loudness on and off.