Kenwood KRC-603C Instruction Manual page 29

The following messages are displayed when certain problems are occurring in your system. Take the recommended
actions.
EJECT No disc magazine has been loaded m the changer The disc magazine is not completely loaded.
^ Load the disc magazine properly
NO DISC No disc has been loaded in the disc magazine
^ Load a disc into the disc magazine
E-04 No disc has been loaded in the disc magazine.
^ Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-down. The CD is scratched a lot.
^ Clean the CD and load it correctly.
BLANK Nothing has been recorded on the MD.
^The next MD will automatically be played.
NO TRACK No tracks are recorded on the MD, although it has a title.
^The next MD will automatically be played.
E-77
The unit is malfunctioning for some reason.
E-99 ^ Press the reset button on the unit. If the "E- 77", "E- 99" code does not disappear, consult your nearest service center.
HOLD The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all
operation.
^Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the
disc will start playing again.
V- If this indicator continues blinking, it is possible that the tape has become jammed or tangled.
' 1 s ^Contact the Kenwood dealer if the cassette tape cannot be ejected.
29