Kenwood KRC-603C Instruction Manual page 24

Installation
■
Installation
Firewall or metal support
(commercial¬
ly available)
NOTE
Make sure that the unit is installed securely in place. If the unit is
unstable, it may malfunction (eg, the sound may skip).
24
■
Installing in Japanese-Made Cars
1 Refer to the section "Removing the hard rubber frame" and
then remove the hard rubber frame.
2 Align the holes in the unit (two locations on each side) with the
vehicle mounting blacket and secure the unit with the accesso¬
ry screws.
N: Nissan cars Accessory©: for Nissan car
Accessory©: for Toyota car
• During installation, do not use any screws except for those pro¬
vided. The use of different screws might result in damage to
the main unit.
• Damage may occur if a screwdriver or similar tool is used with
excessive force during the installations.