Kenwood KRC-603C Instruction Manual page 18

Disc changer control features
(See page i}
• Magazine random play is canceled when you ^top playing a
disc.
• The time needed for random selection depends on the number
of discs loaded in the disc magazine.
Store the names of discs to be displayed when played.
1 Play the disc whose name you want to preset.
• This function is not available for disc changers that do not fea¬
ture the Disc Name Preset function.
• This procedure is not to be used to store the disc and track
titles for MDs that you record.
2
Press the NAME SET button for at least two seconds.
'NAME SET" is displayed and the disc name preset mode is
entered.
The cursor blinks in the position where character input can be
made.
3 Press either the or button to move the cursor to the
desired position.
The button moves the cursor to the left, and the but¬
ton to the right.
You can also move the cursor left or right by pressing the
TRACK+ or TRACK— buttons, respectively, on the remote con
trol.
4 Press the DISC+ or DISC— button to display the desired char¬
acter.
Besides the alphabet {capital letters only) and numbers, you
can choose the following characters: (, ], /, + , —, =, <, and
>.
N0TE 1 Direct Input (Function of remote)
For units with KDC-C810, KDC-C710, KDC-C660 or KDC-C660C
attached, you can directly input letters using the number/letter
entry buttons on the remote.
18
Example: Use the following table to enter the name 'DANCE".
5 Continue steps 3 and 4 until all the characters are chosen for
the name.
You can enter up to eight characters for each name.
6 Press the NAME SET button again to finish name entry and
leave name preset mode.
The disc name is stored and the disc name preset mode is can¬
celed
If you make no entry in a 10-second period, the name will be
stored with the characters input so far
• With the CD changer, you can only store names for up to 100
CDs (The KDC-C710, KDC C66Q and KDC C660C disc changers
can store names for up to 50 discs.), and with the MD chang¬
er,you can only store names for up to 30 MDs. If you store the
name for a 101st (51st) CD or 31st MD, the first name stored
for the type of disc will be erased automatically
• Discs are identified by their total length and number of tracks. If
another disc happens to have the same specifications as one
that you have already stored a name for, the name will be dis¬
played for it, too
• If you want to change the name of a disc, repeat steps 1 and 2
to display the name, and then repeat steps 3 and 4 to input the
changes
• Pressing
the inset button
does not erase the disc names stored
in a disc
changer