Basic Operation; Operating Instructions; Making Calls; Answering Calls - VTech TeleZapper VT2558 Operating Instructions Manual

Making Calls

• Pick up the Handset and press PHONE.
• When you hear a dial tone, dial the number.
• The IN USE LED will illuminate while the Handset is on a call. If you make a mistake
when dialing, press OFF to hang up, then press PHONE to get the dial tone again.
• You must always press PHONE before you can dial a call on the Handset.

Answering Calls

• When an incoming call is ringing, the IN USE/CHARGING LED on the Base and
IN USE/LOW BATT LED on the Handset will flash.
• To answer a call when the Handset is in the Base, just pick up the Handset.
— OR —
• To answer a call when the Handset is away from the Base, press any key on
the Handset (except OFF). This is very useful in a dark environment; you do not
have to fumble around looking for the PHONE key to answer the call.

Disconnecting

• To end a call, either place the Handset back in the Base.
— OR —
• Press OFF on the Handset.

Operating Instructions

9