Handset Features - VTech TeleZapper VT2558 Operating Instructions Manual

1. IN USE/LOW BATTERY LED
• Glows when the Handset is in use.
• Flashes duing programming mode.
• Flashes in cadence with incoming
ringing.
• Flashes slowly when the battery pack
needs recharging.
2. PHONE/FLASH
• Press this key to answer a call or get
a dial tone. While on a call, when you
receive a Call Waiting alert, press
PHONE/FLASH to switch between
calls.
3. ANSWERING MACHINE
• Press this key to enter Answering
System mode. It will flash while the
Handset is controlling the Answering
System. It will also flash to alert you
to new messages.
See the section Handset Layout For
Answering System Operation for
more details.

Handset Features

4. VOLUME UP /VOLUME DOWN
• These keys will raise and lower the
earpiece volume while either in
PHONE or ANSWERING SYSTEM
mode.
5. REDIAL/PAUSE
• With the Handset ON, pressing this
key will dial the last number you
called. In Programming mode,
REDIAL/PAUSE will add a 4 second
pause to a dialing sequence.
6. OFF
• Press this key to end a call.The OFF
key is also used to exit all modes of
operation.
7. PROG/MEM
• This key is used to enter Programming
mode, as well as Memory Dial mode.
8. CHANNEL
• If you experience noise or interference
while on a call, press CHAN to switch
to a clear channel.
7