Table of Contents
Advertisement
Headset Operation
Your VT2558 Handset is equipped with a 2.5mm Headset Jack for use with an optional
accessory Headset for hands-free operation. If you choose to use the Headset option,
you must obtain an optional accessory Headset, which is compatible with the VT2558.
To purchase a Headset, call VTECH Customer Service at 1-800-595-9511.
Once you have a compatible 2.5mm Headset, locate the Headset Jack on the VT2558
Handset. Connect the plug on the Headset cord to the jack on the cordless Handset.
The plug should fit securely. Do not force the connection.
NOTE :
Whenever a compatible Headset is
connected to the cordless Handset, the
microphone on the Handset will be muted.
This is done to limit the effect of background
noise.
Many compatible Headsets have a
reversible, monaural design. You can
wear your Headset on either ear, leaving
one ear free for room conversation.
Belt Clip
The VT2558 is also equipped with a
detachable belt clip. Align the pins on the
inside edge of the clip with the notches on
the sides of the Handset. The belt clip
should snap securely into place. Do not
force the connection.
20
- Quick Links:
- Setup
Hide quick links:
Advertisement
Table of Contents
