Flowchart Of Adjusument - Panasonic Lumix S-R24105 Service Training Manual

7.3.2. Flowchart of Adjusument

- Check the brightness
and settings of camera
body and test chart
- Begin again after
disassembly/assembly
TELE end
Simple Resolution
Real Time
Adjustment
NG
Failure, it needs to be
replaced by new lens
* In case that the process of Disassembly->Assembly->Inspection repeated for 3 times,
we suppose that the lens was NG and it needs to be replaced by new Lens.
Disassembling Decoring Unit and Filter Ring
Removal glue around 3 Adjustment Pins/Screws
Setting to Simple Resolution Real Time Adjustment
( "7.4.1.2" , in detail )
NG
Simple Resolution
OK
Simple Resolution
Glue 1st Lens Frame Adjustment Pins/Screws
Assemblig Decoring Unit and Filter Ring
TELE end
Real Time
Adjustment
OK
WIDE end
Real Time
Adjustment
OK
Visual Checking
OK
Finish
22
- Begin again after
disassembly/assembly
NG
NG