Advertisement
4. Confirm that Assign claimed WAN Edges to site is checked and Primary Site appears below the checkbox.
5. Select Manage configuration with Mist.
6. Enter a Root Password. This password becomes the root password on each claimed SRX Series firewall.
7. Click Claim.
If you claim multiple firewalls, expect a slight delay for the WAN Edges Claim Results window to pop up.
Review the information and Close the window.
8. View your new firewall or firewalls on the Inventory page. The status should show Disconnected.
To complete the onboarding process, see
Integrate Your Juniper Support Account With Your Mist Organization
If you have a services contract for your devices, you can view information about the devices in the Mist dashboard. To
access this information, you must first link your Juniper support account to your Mist organization:
1. In the Mist portal, select Organization > Settings.
2. Under Juniper Account Integration, click Add Juniper Account.
3. Enter the login credentials for your Juniper account, and then click Add.
Juniper Mist validates the Juniper support account, links it to your Mist organization, and populates the Organization >
Inventory > Installed Base page with the devices from the specified account. The information includes device-specific
details along with the status information collected from the devices. You can view the Installed Base information and
decide to onboard a device to the Mist cloud. For information about the Installed Base page, see
Base.
"Step 2: Up and Running" on page 5
.
View Your Installed
4
Advertisement
