Juniper SRX Series Quick Start Manual page 2

• To onboard a single firewall using your mobile phone, see
Mobile App" on page 2
• To onboard one or more firewalls using your computer, see
Browser" on page 3 .
NOTE: The procedures in this quick start guide are intended for new (greenfield) SRX Series firewalls.
• To onboard (adopt) existing, in-service (brownfield), SRX Series firewalls into Mist, see
from Your Juniper Installed
• To onboard non-cloud-ready SRX Series firewalls, use the procedure in the applicable quick start guide in the
Quick Start Portal.
• To provision an SRX Series firewall using other methods such as CLI or J-Web, see the applicable quick start
guide in the Quick Start
Your SRX Series firewall is cloud-ready if it has a QR claim code on the front or back panel.
Onboard One SRX Series Firewall Using the Mist AI Mobile App
From your mobile phone:
1. Download and install the Mist AI app from the Google
2. Open the Mist AI app and log in using your account credentials.
You can also link your Juniper support account to your organization to view details of all Juniper devices associated
with your account. See
3. Select your organization.
4. Tap Claim Devices to Org and focus the camera on the QR code. The app automatically claims the SRX Series firewall
and adds it into your organization's inventory.
.
Base.
Portal.
"Integrate Your Juniper Support Account With Your Mist Organization" on page 4
"Onboard One SRX Series Firewall Using the Mist AI
"Onboard One or More SRX Series Firewalls Using a Web
Play Store or Apple App
Adopt a WAN Edge
Store.
2
.