Installation
Check for dial tone
After the batteres are charged, pck up the handset and press TALK; you should hear a dal tone
If you do not, refer to the Troubleshootng secton n the back of ths user's manual
• If the phone wll
not be used for a
Charge the handset battery
long perod of tme,
The battery may have enough power to allow for short calls If the battery power s low, NEEDS
remove the battery
to prevent battery
RECHARGING wll appear on the handset screen For best performance charge the battery for at
damage
least 16 hours the first time.
Language
• Press PROG, then press
• The current settng blnks Press
Espanol or Francas)
• Press SEL to save your selecton
Set the dial mode
If you have touch tone servce, the phone s ready to use as soon as the battery s charged If you
have pulse (rotary) servce, you'll need to change the dal mode
• Press PROG.
• Press
• Press SEL. The current settng blnks
• Press
• Press SEL to save
8
untl LANGUAGE s dsplayed Press SEL.
or
or
untl the screen dsplays DIAL MODE: and the current settng
or
or
to select TONE or PULSE.
www.vtechphones.com
untl the screen dsplays the correct language (Englsh,