Additional Information; Headset Operation; Belt Clip - VTech i5867 Operating Instructions Manual

Headset Operation

Your i 5867 Handset is equipped with a 2.5mm Headset Jack for use with an optional
accessory Headset for hands-free operation. If you choose to use the Headset option, you
must obtain an optional accessory Headset, which is compatible with the i 5867. For best
results, use a VTech 2.5mm headset.
To purchase a Headset, call VTech Customer Service at 1-800-595-9511.
Once you have a compatible 2.5mm Headset, locate the Headset Jack on the i 5867
Handset. Connect the plug on the Headset cord to the jack (under a small rubber flag)
on the cordless Handset. The plug should fit securely. Do not force the connection.
NOTE:
•
Whenever a compatible Headset is connected
to the cordless Handset, the microphone on the
Handset will be muted. This is done to limit the
effect of background noise.
•
Many compatible Headsets have a reversible,
monaural design. This means you can wear
your Headset on either ear, leaving one ear
free for other conversations.
# # #

Belt Clip

The i 5867 is also equipped with a detachable
belt clip. Align the pins on the inside edge of
the clip with the notches on the sides of the
Handset. The belt clip should snap securely into
place. Do not force the connection.
37