Spare Battery Charger/Power Backup Feature; Power Guard Feature - VTech i5867 Operating Instructions Manual

Spare Battery Charger/Power Backup Feature

Power Guard Feature

The i 5867 uses the spare battery charger in the Base Unit to provide power backup in the
event of a power failure or outage. With fully charged battery cells in the spare battery
charger, you will be able to place and receive calls from the Handset only, for up to 2 1/2
hours during a power outage.
The spare battery cells can also be used to replace drained Handset battery cells, ensuring
uninterrupted use. The spare battery cells are optional and can be purchased separately.
NOTE:
When using your i 5867 during Power Backup mode, audio quality may be com-
promised due to reduced power availability.
To order battery cells, Headsets and additional Handsets (model i 5803 or
i 5807), call VTech Customer Service at 1-800-595-9511. In Canada, call
1-800-267-7377.
Installation
1. Open the spare battery charger by pressing
the release button, located on the right-hand side
of the Base Unit. A drawer will open to reveal
the spare battery compart-
ment.
2. Place the battery cells in
the spare battery charger
with the positive and negative
poles aligned in the battery
compartment.
3. Push the drawer closed.
The spare battery charger
takes 24 hours to fully charge
drained battery cells.
10