How To Scan - Olivetti d-COLOR MF3100 Quick Manual

6.2 Using the scan function
6.2.2

How to scan

1
Load the original.
2
Press the Scan key.
3
Specify the destination.
% You can select the desired destination from the pre-registered destination list, or directly enter des-
tination information. For details on how to register a destination, refer to page 6-17.
4
Specify scan transmission options.
% On the main screen (Scan mode), press the + or , key to select the setting you want to change.
5
Press the Start key.
% To scan in color, press the Start (Color) key. To scan in black and white, press the Start (B&W) key.
% If you press the Stop/Reset key while scanning the original, scan processing stops, and the confir-
mation screen appears to check whether you wish to cancel the job. To stop sending, cancel the
job.
Sending starts.
d-COLOR MF3100
6
6-9