Using The Copy Function; How To Copy - Olivetti d-COLOR MF3100 Quick Manual

6.4

Using the copy function

6.4 Using the copy function
6.4.1

How to copy

1
Load the original.
2
Press the Copy key.
3
If necessary, configure copy settings.
% On the main screen (Copy mode), press the + or , key to select the setting you want to change.
4
If necessary, specify the number of copies using the Keypad.
% To re-enter the number of copies, press the Back key.
5
Press the Start key.
The original is scanned, and copying starts.
% To copy in color, press the Start (Color) key. To copy in black and white, press the Start (B&W) key.
% If you press the Stop/Reset key, the confirmation screen appears to check whether to cancel the
job. To stop copying, cancel the job.
d-COLOR MF3100
6
6-13