Maintenance
9.5 Corrective maintenance
①
Heat up 80 ... 100 °C
9.5.1.1
Bearing bushes
Protect the bearings against the ingress of dirt and moisture.
When fitting the bearing cartridges, observe the specified screw tightening torques.
9.5.1.2
Installing rolling bearings
• Extreme caution and attention to cleanliness are crucial when installing rolling bearings.
Observe the correct assembly sequence of the components.
• Attach all components with the specified tightening torques (Page 119).
Note
For further information about mounting the rolling bearing, please refer to the catalog or the
information provided by the rolling bearing manufacturer.
Procedure
1. Replace the damaged components.
2. Remove any dirt from the components. Remove any grease residue and the remains of
sealant or liquid threadlocker.
98
1PC1423 roller-table motors SH 112 ... 400
Operating Instructions