Bearing Bushes; Fitting The Bearing Cartridges; Installing Bearings - Siemens SIMOTICS SD Operating Instructions Manual
Low-voltage motors
Hide thumbs
Also See for SIMOTICS SD:
- Operating instructions manual (136 pages) ,
- Compact operating instructions (166 pages) ,
- Operating instructions manual (100 pages)
Table of Contents
Advertisement
Maintenance
9.4 Corrective maintenance
①
Heat up 80 ... 100 °C
9.4.2.1
Bearing bushes
Protect the bearings against the ingress of dirt and moisture.
9.4.2.2
Fitting the bearing cartridges
When fitting the bearing cartridges, observe the specified screw tightening torques.
9.4.2.3
Installing bearings
Sealing the bearings
Note the following details:
• Shaft sealing rings are used to seal machines at the rotor shaft.
– For V rings, comply with the assembly dimension.
• Use the specified bearings.
• Ensure that the bearing sealing disks are in the correct position.
• Insert the elements for bearing preloading at the correct end.
• Fixed bearings can have a locking ring or bearing cover.
108
1LE5, 1PC4 shaft heights 280 ... 355
Operating Instructions, 11/2022, A5E41454666A
Advertisement
Table of Contents
